Your 60V X-Class has Settings that you can adjust for your preference or if needed. Before adjusting any settings, please be sure, for your safety, that your bike is on stable ground and that you are stationary while adjusting the settings. If at any

<p>Your 60V X-Class has Settings that you can adjust for your preference or if needed.&#xA0;</p><p>Before adjusting any settings, please be sure, for your safety, that your bike is on stable ground and that you are stationary while adjusting the settings.</p><p>If at any time you have any questions or concerns regarding your settings please do not hesitate to reach out to our Technical Support Team at <a href="mailto:info@arielrider.com">info@arielrider.com</a>.&#xA0;</p><p>This video will show you the steps for adjusting your settings.</p><p><span contenteditable="false" draggable="true" class="fr-video fr-deletable fr-rv fr-fvc fr-dvb fr-draggable"><iframe width="100%" src="https://www.youtube.com/embed/GyqT_RTWaM8??si=IWUU9jNC24OTViXW&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable"><span class="fr-mk" style="display: none;">&#xA0;</span><span class="fr-mk" style="display: none;">&#xA0;</span><span class="fr-mk" style="display: none;">&#xA0;</span></iframe></span></p><p>You can also use these steps to follow along.</p><h2 id="isPasted">How to Access Advanced Settings Menu</h2><ol><li>While the bike is powered on <strong>Double-click</strong> the power button to enter the personalized parameter setting interface.</li><li>Use the <strong>+ or - buttons</strong> to cycle through the available settings</li><li>Press the <strong>power button</strong> to make your selection and save any changes</li><li><strong>Double-click</strong> the power button to exit the Advanced Settings menu</li></ol><hr><h2 id="p1---unit-setting-speed-display">P1 - Unit Setting (Speed Display)</h2><p><strong>Purpose:</strong> Choose between miles or kilometers for speedometer display</p><h3 id="steps">Steps:</h3><ol><li>Navigate to P1 using + or - buttons</li><li>Press power button to enter P1 settings</li><li>Use + and - buttons to choose:<ul><li><strong>0</strong> = kph (kilometers per hour)</li><li><strong>1</strong> = mph (miles per hour)</li></ul></li><li>Press power button to save selection</li><li>You will return to the Advanced Settings menu</li></ol><hr><h2 id="p2---pedal-assist-pas-levels-setting">P2 - Pedal Assist (PAS) Levels Setting</h2><p><strong>Purpose:</strong> Set available pedal assist levels (default: 0-5)</p><h3 id="&#xFE0F;-important-warning">&#x26A0;&#xFE0F; Important Warning:</h3><p>Choosing 1-3, 1-5, or 1-9 will disable the ability to deactivate the throttle (PAS level 0). It is recommended to keep PAS 0 available so the throttle can still be deactivated when desired.</p><h3 id="steps-1">Steps:</h3><ol><li>Navigate to P2 using + or - buttons</li><li>Press power button to enter P2 settings</li><li>Use + and - buttons to select desired PAS range</li><li>Press power button to save selection</li><li>You will return to the Advanced Settings menu</li></ol><hr><h2 id="p3---wheel-diameter-setting">P3 - Wheel Diameter Setting</h2><p><strong>Purpose:</strong> Adjust wheel diameter to match installed wheel and tire (default: 24.0 inches)</p><h3 id="steps-2">Steps:</h3><ol><li>Navigate to P3 using + or - buttons</li><li>Press power button to enter P3 settings</li><li>Use + and - buttons to select wheel diameter (range: 8-30 inches)<ul><li>Can be adjusted in 0.5 inch increments</li></ul></li><li>Press power button to save selection</li><li>You will return to the Advanced Settings menu</li></ol><hr><h2 id="p5---boot-password-enable">P5 - Boot Password Enable</h2><p><strong>Purpose:</strong> Enable/disable boot password protection (default: disabled)</p><h3 id="steps-3">Steps:</h3><ol><li>Navigate to P5 using + or - buttons</li><li>Press power button to enter P5 settings</li><li>Use + and - buttons to select:<ul><li><strong>n</strong> = disabled (default)</li><li><strong>y</strong> = enabled (default password will be 1919)</li></ul></li><li>Press power button to save selection</li><li>You will return to the Advanced Settings menu</li></ol><hr><h2 id="p6---modify-boot-password">P6 - Modify Boot Password</h2><p><strong>Purpose:</strong> Change the boot password (default: 1919)</p><h3 id="steps-4">Steps:</h3><ol><li>Navigate to P6 using + or - buttons</li><li>Press power button to enter P6 settings</li><li><strong>Enter current password:</strong><ul><li>Input the old password using + and - buttons</li><li>If correct, you&apos;ll see &quot;PAS&quot; prompt</li><li>If incorrect, you&apos;ll see &quot;ERROR&quot; message</li></ul></li><li><strong>Set new password (after successful verification):</strong><ul><li>Use + and - keys to input new password</li><li>Press power key to advance to next digit</li></ul></li><li><strong>To cancel or if you make a mistake:</strong><ul><li>Double-press power key to return to setting selection menu</li></ul></li></ol><hr><h2 id="p7---automatic-shutdown-setting">P7 - Automatic Shutdown Setting</h2><p><strong>Purpose:</strong> Set display auto-shutdown timer (default: 8 minutes)</p><h3 id="important-notes">Important Notes:</h3><ul><li>This only affects display shutdown, not battery shutdown</li><li>Batteries have non-adjustable 20-minute auto-shutdown</li><li>Always use main power switch when finished riding</li></ul><h3 id="steps-5">Steps:</h3><ol><li>Navigate to P7 using + or - buttons</li><li>Press power button to enter P7 settings</li><li>Use + and - buttons to select time (0-60 minutes)<ul><li><strong>0</strong> = disables display auto-shutdown (battery still shuts down after 20 minutes)</li><li><strong>1-20 minutes</strong> = effective range due to battery auto-shutdown</li><li><strong>21-60 minutes</strong> = limited by battery&apos;s 20-minute timer</li></ul></li><li>Press power button to save selection</li><li>You will return to the Advanced Settings menu</li></ol><hr><h2 id="p8---trip-reset">P8 - TRIP Reset</h2><p><strong>Purpose:</strong> Clear trip mileage data</p><h3 id="steps-6">Steps:</h3><ol><li>Navigate to P8 using + or - buttons</li><li>Press power button to enter P8 settings</li><li>Use + and - buttons to select:<ul><li><strong>y</strong> = yes, clear trip mileage</li><li><strong>n</strong> = no, keep current data</li></ul></li><li>Press power button once to confirm selection</li><li>You will return to the Advanced Settings menu</li></ol><hr><h2 id="exiting-advanced-settings">Exiting Advanced Settings</h2><p>Once you&apos;ve completed all desired changes:</p><ol><li><strong>Double-click</strong> the power button to exit the Advanced Settings menu</li><li>Your bike will return to normal operation mode</li></ol>

X-class 60V - Display Settings

X-Class 60V Off-Road Edition

X-Class 60V Performance Edition

X-Class 60V Cafe Racer Edition

Contact us
Sales/Tech Support Hours: Mon-Friday 9am-5pm PST

Contact Us

Home Page

Ariel Rider Ebikes