Bluetooth Horn Set Up InstructionsUpdated 8 days ago

This guide covers setup, sound controls, anti-theft settings, and safety warnings for your rechargeable Ariel Rider Electric Bike Horn & Alarm.

You can download these instructions through this link.

Remote Control Button Overview

• Button 1 (Top-Left): Disarm / Alarm off
• Button 2 (Top-Right): Arm / Alarm on
• Button 3 (Center): Horn / Bell trigger
• Button 4 (Bottom-Left): Volume + / Ringtone + (long press)
• Button 5 (Bottom-Right): Volume - / Ringtone - (long press)

Powering On, Off, and Pairing

• Power On / Off:Touch and hold the back of the horn for 2 seconds.
  • 2 Beeps: Horn is powered ON.
  • 1 Beep: Horn is powered OFF.
• Pairing the Remote:
  1. Turn the horn on.
  2. Briefly touch the back of the horn (less than 2 seconds) to enter pairing mode. The device will beep repeatedly.
  3. Press any button on the remote control to complete pairing.
  4. Troubleshooting: If the horn continues beeping, repeat the process or charge the remote.

Horn & Sound Controls

• Sound Horn: Press Button 3.
• Adjust Volume: Press Button 4 (+) or Button 5 (-) to switch between 3 volume levels.
• Change Ringtone: Long-press Button 4 or Button 5 to cycle through available sounds: whistle, horn, alarm, or beep.

Anti-Theft Alarm Setup

• Arming the Alarm:
  1. Press Button 2. The horn will beep and enter pre-arm mode.
  2. After 5 seconds, an alarm chirp will sound to confirm the alarm is active.
• Disarming the Alarm: Press Button 1.
• Adjusting Motion Sensitivity (3 Levels):
  1. Press Button 2 to set the alarm.
  2. Before the 5-second alarm chirp sounds, press Button 4 to increase sensitivity or Button 3 to decrease sensitivity.
  3. Listen for 1 to 3 beeps indicating the newly selected sensitivity level.
  4. The setting locks in once the alarm chirp sounds.

Important Safety & Maintenance Warnings

• Always take the remote control with you when leaving your bike.
• If the remote control fails to respond, charge the device.
• Always close the USB port's waterproof cover when not actively charging.
• Do not use sharp objects to press buttons on the remote control.
• Avoid activating the loud horn in enclosed spaces or crowded areas to protect hearing.
• Keep the unit away from fire, high heat, and hot objects.