*Please note, this is for X-Class models prior to 2025

Installing a seat riser on your X-Class is a straightforward process that can significantly improve your riding comfort and performance. Follow these steps for a secure and efficient setup:

---

Tools Needed:

• Allen wrench set (specific sizes provided in the video)  
• Adjustable wrench or pliers  

---

Step 1: Prepare Your Bike

1. Ensure your X-Class bike is on a flat, stable surface.  
2. Use a bike stand if available to keep the bike upright for easier access.  

---

Step 2: Remove the Current Seat Post

1. Locate the seat post clamp beneath your current seat.  
2. Use the appropriate Allen wrench to loosen the clamp. 
3. Carefully slide the seat post out of the frame.  

---

Step 3: Install the Seat Riser

1. Align the seat riser with the seat post opening on your bike frame.  
2. Insert the riser into the frame and ensure it’s fully seated.  
3. Use the bolts provided to secure the riser, tightening them with the Allen wrench for a snug fit.  

---

Step 4: Reinstall the Seat

1. Slide your seat post into the installed riser.  
2. Adjust the seat height to your preferred position for optimal comfort.  
3. Tighten the seat post clamp securely using the Allen wrench.  

---

Step 5: Perform Final Checks

1. Double-check that all bolts and clamps are tightened properly.  
2. Sit on the bike to test the seat’s height and stability.  
3. Make any minor adjustments as necessary to ensure a comfortable and secure fit.  

---

By following these simple steps, your X-Class will be ready for an enhanced and more comfortable riding experience. If you run into any issues, refer to the video for visual guidance or consult the user manual for additional support.