Ariel Rider Ebikes logo
Ariel Rider Ebikes logo

All articles

In-Frame Basket installation video|| Ariel Rider X-Class 60VUpdated 14 days ago

Center Basket Installation Guide

Follow the steps below to install the center basket on your Ariel Rider e-bike.


Required Tools & Hardware

  • 5 × M6 bolts
  • 5 × Washers
  • 4mm Allen wrench (or socket driver with a 4mm hex bit)

Step-by-Step Installation Instructions

  1. Position the basket: Align the center basket over the frame so the mounting points line up with the threaded holes on the down tube and seat stay.
  2. Start bolts by hand: Insert the 5 M6 bolts with washers into the threaded mounting holes, turning them by hand to prevent cross-threading.
  3. Secure the hardware: Using a 4mm Allen wrench, tighten all 5 bolts until snug and fully secured.

If you have any questions, please reach out to us through our contact form.

Was this article helpful?
Yes
No