Installing and Moving your X-Class 60 Volt Second BatteryUpdated 15 hours ago
Installing your Second battery on your X-Class 60V
You can follow this video for the installation instructions:
We also have these written instructions as well:
What You'll Need
- Your bike tray kit
- The 8 screws from your bike frame
- Basic tools for screw removal/installation
Step-by-Step Installation
Step 1: Remove Frame Screws
Remove the 8 screws from the frame of your bike. Keep these screws organized as you'll need them for mounting.
Step 2: Choose Your Mounting Location
Decide whether you want to mount the tray on:
- Top tube (upper horizontal frame tube)
- Down tube (lower diagonal frame tube)
Step 3: Select the Right Screws
From the 8 screws you removed, identify and set aside the 4 longest screws. These will be used to secure the tray to your chosen mounting location.
Step 4: Mount the Tray
For Top Tube Mounting:
- Slide the tray into position on the top tube
- Using the 4 longest screws you selected, attach the tray to the bike
- Tighten all 4 screws securely
For Down Tube Mounting:
- Place the tray on the down tube
- Connect using the 4 longest screws you selected earlier
- Ensure all 4 screws are tightened securely
Step 5: Connect the Power
- Locate the plug on the underside of the top tube
- Plug in the tray's power cord
- Route the wire through the provided channel/slot to keep it secure and tidy
Step 6: Install Your Battery
- Place your battery onto the tray
- Slide the battery forward until it locks securely to the tray
- Ensure the battery is firmly attached before riding
Installation Complete!
Your bike tray is now ready for use. The battery should be securely mounted and connected to power.
If you need any assistance or have further questions please do not hesitate to reach out to us at [email protected].