Molle Panel installation video || Ariel Rider X-Class 60VUpdated 6 days ago

You can find the video here. 

Tools and Hardware:

4mm hex wrench or 4mm socket driver with 4mm hex socket

6x m5 bolts and washers

Steps:

1. Place the panel in the front section of the frame.
   

2. Line up the slots in the panel with the threaded holes on the frame. Insert the four screws with washers in the threaded holes and tighten as far as possible with just your fingers.

3. To tighten the panel up permanently, use a 4-millimeter hex wrench or a socket driver with a 4-millimeter hex bit to tighten the four screws down to snug. 

If you have any questions, contact Ariel Rider Tech Support through our contact form.