2nd Battery installation video || Ariel Rider X-Class 60VUpdated 3 days ago

Installing your Second battery on your X-Class 60V

You can follow this video for the installation instructions:

We also have these written instructions:

What You'll Need:

• Your bike tray kit
• The 8 screws from your bike frame
• Basic tools for screw removal/installation
  
  

Step-by-Step Installation:

Step 1: Remove Frame Screws

Remove the 8 screws from the frame of your bike. Keep these screws organized as you'll need them for mounting.

Step 2: Choose Your Mounting Location

Decide whether you want to mount the tray on:

• Top tube (upper horizontal frame tube)
• Down tube (lower diagonal frame tube)

Step 3: Select the Right Screws

From the 8 screws you removed, identify and set aside the 4 longest screws. These will be used to secure the tray to your chosen mounting location.

Step 4: Mount the Tray

For Top Tube Mounting:

1. Slide the tray into position on the top tube
2. Using the 4 longest screws you selected, attach the tray to the bike
3. Tighten all 4 screws securely

For Down Tube Mounting:

1. Place the tray on the down tube
2. Connect using the 4 longest screws you selected earlier
3. Ensure all 4 screws are tightened securely

Step 5: Install the Battery Balancer

1. Remove the controller cover and cut the zip ties that are bundling the wiring.  Locate the power connector (yellow) and unplug it.
   

2. Mount the battery balancer forward of the controllers with the two inputs facing toward the front of the bike.  Connect the single output to the controller power input.  Connect the existing battery connector to one of the balancer inputs.
   

3. Mount the Battery tray socket to its location just forward of the shock mount.  Connect the yellow power connector to the other input of the balancer. 
   

4. Locate the “2 in 1” cable it will have a lead that has a black cap on it.  Connect the other connector (red) of the battery tray socket to this cable. 
   
   

Step 5: Connect the Power

1. Locate the plug on the underside of the top tube
2. Plug in the tray's power cord
3. Route the wire through the provided channel/slot to keep it secure and tidy

Step 6: Install Your Battery

1. Place your battery onto the tray
2. Slide the battery forward until it locks securely to the tray
3. Ensure the battery is firmly attached before riding

Installation Complete!

Your bike tray is now ready for use. The battery should be securely mounted and connected to power.

If you need any assistance or have further questions please do not hesitate to reach out to us through our contact form, here.