Getting to Know Your Kepler

What is the weight capacity of the rear rack on the Kepler?

The weight capacity of the rear rack on the Kepler is 77 lbs.

Why is the wheel diameter setting on Kepler 27.5 and why?

The display unit reads the data in current from the controller and then converts it into MPH to show on the screen. When you set it to 26, it'll read it as it's 26 inches however since your tires are 4" thick it'll read it lower than the actual speed

What is the seatpost dimensions of Kepler?

The seat post is 30.4mm in diameter and 400 mm in length.

How long does it take to charge Kepler?

Below you'll find the chart as a general idea about charging times:. Distance Traveled. Estimated Time to Fully Recharge. 5 mi (8 km). 1 hour. 10 mi (16 km). 1.5 hours. 15 mi (24 km). 2.5 hours. 20 mi (32 km). 3.5 hours. 25 mi (40 km). 4.5 hours. 20

How many lumens is the Kepler headlight?

The headlight of Kepler is 52V and 50 lux.

How to adjust pedal assist levels in Kepler (PAS)

Can I set speed limits for each pedal assist level?. You cannot change the speed limit per pedal-assist mode however, you can increase the max number of pedal-assist levels which will reduce lower assist levels. In order to do so; when the bike is of

How do I setup time on Kepler display?

There's no time function on the screen. The time you're seeing is the operation time of the bike showing how long it's been on since the last time data is cleared.