What size nut do I need for my axles?Updated 4 hours ago
Please refer to this chart to select the correct nut for your axle.
Do not hesitate to reach out to [email protected] if you need assistance.
Please refer to this chart to select the correct nut for your axle.
Model | Front | Rear |
X-Class 60V Performance Edition | M10 X 1.25 TPI BOLTS ON BOTH ENDS | M14x1.5mm Flanged locknut |
X-Class 60V Cafe Racer/Off Road Editions | M10 X 1.25 TPI BOLTS ON BOTH ENDS | M14x1.5mm Flanged locknut |
Grizzly 52V Gen 3 | M14 x 1.5 tpi (21mm wrench) | M14 x 1.5 tpi (21mm wrench) |
X-Class 52V Gen 1 | ⅜-26, 15 mm | M14 x 1.5 tpi (21mm wrench) |
X-Class 52V Gen 2 | ⅜-26, 15 mm | M14 x 1.5 tpi (21mm wrench) |
X-Class 52V Step Thru | ⅜-26, 15 mm | M14 x 1.5 tpi (21mm wrench) |
Kepler 52V - High Step | ⅜”x16 Nut and takes a 15 mm wrench | M14 x 1.5 tpi (21mm wrench) |
Kepler 52V Step Thru | ⅜”x16 Nut and takes a 15 mm wrench | M14 x 1.5 tpi (21mm wrench) |
D-Class 48V | M14X1.5 | M14X1.5 |
Do not hesitate to reach out to [email protected] if you need assistance.