Information related to the 60 Volt X-Class bikes maintenance and troubleshooting
This guide will walk you through replacing your e-bike's main wire harness assembly. This is an advanced repair that requires careful attention to safety and proper procedures. If you are uncomfortable performing this repair please seek the help of a
Error 21 indicates a speed sensor malfunction on your e-bike. This error typically occurs when the bike's control system cannot properly communicate with the speed sensor, which monitors wheel rotation and provides critical data for motor operation.
Error 08 indicates a hall sensor error on your e-bike. This error occurs when there's a problem with the magnetic sensors that detect the motor's rotor position. Error 09 indicates a motor phase error on your e-bike. This error occurs when there's a
Error 07 indicates that a battery with higher voltage than your bike's original specification has been connected to your e-bike. This is a protective measure to prevent damage to your bike's electrical system from incompatible batteries. To resolve t
Error 05 indicates a throttle error on your e-bike. This error occurs when the bike's controller detects an issue with the throttle system, which could be due to improper throttle position at startup, connection problems, or damaged throttle componen