Display & control settings
Display & Setting FAQS.
How do I turn on the headlights?
Below are the instructions for turning on the headlight on your Ariel Rider bikes. Note: Some newer models feature a running light that remains on at all times for improved visibility. *Note: this applies to X-Class models prior to 2025. If you have
How do I access the display settings?
The settings on your bike are vital for making your ride truly yours. Each Ariel Rider bike model has a unique method for accessing settings. Below, you can find the basic instructions for navigating your settings for each bike model, as well as link
How can I order a replacement display for my bike?
To request a replacement display, please reach out to our Customer Service or Technical Support team using the contact form on our Contact Page. To ensure you receive the correct display and that this is the best solution for your bike, please provid
How can I reset the PIN number on my display if I've forgotten it?
The display PIN is a local security code used to lock the powered functions of your e-bike. If you have forgotten your PIN code, the display unit must be replaced. The PIN is stored locally within the display memory and cannot be reset or recovered r
What should I do if the display screen on my e-bike is not functioning properly?
If you are experiencing display or electrical issues, follow these step-by-step troubleshooting instructions to perform a power cycle and inspect your connections. If the issue persists, please submit a ticket via our Get in Touch page (select "Conta
Should I reset to factory settings in the display?
You can reset to factory settings. In most cases this is unnecessary, and it will delete your travel data as well as reset your speed limiter. We do not recommend that you reset the bike to factory settings unless directed to by an Ariel Rider repres
Should I use dielectric grease in display connectors?
Dielectric grease is not recommended for e-bike display connectors as it insulates, interfering with signal transmission, attracting dust, and causing arcing. Use contact oils or corrosion inhibitors for better protection.
What is error code 30?
Error 30 refers to a communication error that can be caused by any of the bike's electrical components. Follow this step-by-step guide to isolate and identify the source of the issue. Whenever performing maintenance, inspection, or disconnecting elec
The Mileage on my bike is inaccurate
Having accurate mileage displayed on your odometer is important to the casual and serious rider alike. There are a few factors that can cause your mileage readings to be inaccurate. If you have checked these settings and continue to experience mileag