Wheels, Motors, Tires, and Spokes
Motors, wheels and tire setup for the Ariel Rider X‑Class 60V.
X‑Class 60V: My motor is making a clicking sound
Rear motor clicking: torque the axle nuts to 65 N·m, align anti‑rotation washers, spin to check spoke tension, and lubricate if squeak persists.
X‑Class 60V: My bike feels weak
Often times when the bike feels like it is less powerful or isn't as fast as it used to be this can be a bit of an illusion, as you have acclimated to the power that the bike has. However it is also important to know that the bike will reduce its pow
X‑Class 60V: My bike has less power on hills
The controller hit its thermal/current limit. This happens to help mitigate potential damage to your controller or motor by reducing the load those components are under. This can be mitigated by pedaling the bike or even using the walk mode if the hi
X‑Class 60V: My motor isn't turning, but there are no error codes?
There may not always be an error code that comes up when the motor isn't working right. Often this means that the cause of the issue is mechanical or otherwise not interfering with the motor's communication with the controller. The following check li